Publicidad
Idiomas disponibles
Idiomas disponibles
2-5-4. Timer (On/Off timer)
Button operation
1
2
3
Select "Timer" from the Main menu (refer to page
SELECT/HOLD
23), and press the
The On/Off timer will not work in the following
cases:
when On/Off timer is disabled, during an error, during
check (in the service menu), during test run, during
remote controller diagnosis, when the clock is not set,
during function setting, when the system is centrally
controlled (when On/Off operation or timer operation
from local remote controller is prohibited), when the
HOLD function is enabled.
Move the cursor to "Timer," and press the
SELECT/HOLD
button.
The current settings will appear.
Move the cursor to "On/Off timer," and press the
SELECT/HOLD
button.
P
Main
button.
35
Publicidad
