Publicidad
Idiomas disponibles
Idiomas disponibles
2-5-5. Timer (Auto-Off timer)
Button operation
1
2
3
38
Bring up the Timer setting screen.
(Refer to page 35.)
Select "Auto-Off", and press the
button.
The Auto-Off timer will not work in the following
cases:
when Auto-Off timer is disabled, during an error, during
check (in the service menu), during test run, during
remote controller diagnosis, during function setting,
when the system is centrally controlled (when On/Off
operation or timer operation from local controller is
prohibited), when the HOLD function is enabled.
The current settings will appear.
Move the cursor to "Auto-Off" or "Stop in --- min" with
the
or
button.
F1
F2
Change the setting with the
•
Auto-Off: No (disable)/Yes (enable)
•
Stop in --- min: Timer setting (The settable range is 30 to
240 minutes in 10-minute increments.)
P
Main
SELECT/HOLD
or
button.
F3
F4
Publicidad
