Publicidad
Idiomas disponibles
Idiomas disponibles
4
5
34
Move the cursor to "Ref. address" or "Unit No." with
the
button to select.
F1
Select the refrigerant address and the unit number for
the units to whose vanes are to be fixed, with the
or
button, and press the
F3
•
Ref. address: Refrigerant address
•
Unit No.: 1, 2, 3, 4
Press the
button to confirm the unit.
F4
The screen at left shows a sample display on
M/P-series. On CITY MULTI units, "M-NET address" is
displayed instead of "Ref. address", and the "Unit No."
will not be displayed.
Select the desired outlets from "1," "2," "3," "4," or "1,
2, 3, 4 (all outlets)" with the
Select the desired airflow setting from "Left," "Front
left," "Front," "Front right," "Right," or "No setting" with
the
or
button.
F3
F4
Press the
SELECT/HOLD
A screen will appear that indicates the setting
information is being transmitted.
The screen will automatically return to the previous
screen when the transmission is completed.
Make the settings for other outlets, following the
same procedures.
* Refer to the instruction book for the indoor unit for more
information on the two air directions.
Navigating through the screens
• To return to the previous screen ......
SELECT/HOLD
button.
or
button.
F1
F2
button to save the settings.
button
RETURN
F2
Publicidad
