Publicidad
Idiomas disponibles
Idiomas disponibles
Method 2 Mesh Networking via Mesh Button
1. Make sure the main router is connected to the network. Connect the
satellite router to power and place it near but at least one meter away
from the main router. Otherwise, they will interfere with each other and
affect the networking.
2. After the satellite router powers on, the main router will automatically
discover it, and the indicator of the main router will start breathing blue.
Note: If the satellite router is already configured, press its reset button to
restore it to the factory settings first.
3. Press the mesh button on the main router, and the indicators of the
main router and satellite router will start blinking. It will take about
2 minutes to complete the Mesh networking.
4. When the Mesh networking is completed, the indicator of the satellite
router turns into blue.
Mesh/Reset
Internet
button
07
Publicidad
