ISOtunes LINK Aware Manual Del Usuario página 6

EN
The output of the electrical audio circuit of this
hearing protector may exceed the daily limit
sound level.
These earmuffs are intended to protect your
ears against hazard noise.
The audibility of warning signals at a specific
workplace may be impaired while using the
entertainment facility.
This product may be adversely affected by
certain chemical substances, such as sunscreen
and bugspray. Further information may be
sought from the manufacturer.
The fitting of hygiene covers to the cushions may
affect the acoustic performance of the ear-muffs.
Recommendations
The wearer should ensure the product is
properly cleaned and dry before and after use.
Storage should be in a clean and dry location
between -20 °C and 50 °C. The battery should not
be fully discharged before long term storage.
The wearer should ensure that:
• The hearing protector is fitted, adjusted, and
maintained in accordance with the
manufacturer's instructions.
• The hearing protector is worn at all times in
noisy surroundings.
• The hearing protector is regularly inspected
for serviceability.
If these recommendations are not adhered to,
the protection afforded by the hearing protector
will be severely impaired.
The size range for the earmuff is S M L.
The mean mass of the product is 430g.
Date of Obsolescence: 3 years from purchase
date.
Not to be used in Explosive Atmospheres.
Additional Notes
ISOtunes® LINK Aware is compliant with
Bluetooth® V4.2. We do not guarantee
compatibility of all functions on every
Bluetooth®-enabled device. Please check your
device's user manual for compatibility and
functionality.
Please note, the hearing protector provides
an entertainment audio facility. The ear-muff
provides audio signal sound pressure level
limitation which limits the entertainment audio
signal to 82 dB(A) effective to the ear. This limit
is maintained for bluetooth signal inputs which
are standard to the Bluetooth A2DP, HFP, and
HSP specifications. There is no analog line input
on this product.
This earmuff is provided with electrical audio
input. The wearer should check correct
operation before use. If distortion or failure
is detected, the wearer should refer to the
manufacturer's advice.
For additional information about ISOtunes®
LINK Aware please visit www.ISOtunes.com/
LINKAwareManual. For additional information
or questions about ISOtunes® products or
spares and accessories, please contact our
support team.
Replacement Parts: Hygiene Kit (ear-cushions
and foam inserts) Model Number: IT-83
Replace ear-cushions.
1. Put your finger between the ear cushions
and foam.
2. Pull the Foam Ear cushion away from the
earcup.
3. Remove the foam inserts in the earcup.
4. Install the new foam inserts
5. Snap the new ear-cushion in place on the
earcup
The following information shall be available from
the manufacturer on request:
a) results of tests performed in accordance with
this standard;
b) the name and country of the test laboratory
which performed the tests specified and the
date of the tests.
FCC
Caution: The user is cautioned that changes or
modifications not expressly approved by the
party responsible for compliance could void the
users' authority to operate the equipment.
6