• Temperature adjustments should be
made according to the frequency of
door openings, the quantity of food kept
inside the appliance and the ambient
temperature in the location of your
appliance.
• When the appliance is first switched on,
allow it to run for 24 hours in order to
reach operating temperature. During this
time, do not open the door and do not
keep a large quantity of food inside.
• A 5 minute delay function is applied
to prevent damage to the compressor
of your appliance when connecting
or disconnecting to mains, or when
an energy breakdown occurs. Your
appliance will begin to operate normally
after 5 minutes.
Climate class and meaning:
T (tropical): This refrigerating appliance
is intended to be used at ambient
temperatures ranging from 16 °C to 43 °C.
ST (subtropical): This refrigerating
appliance is intended to be used at ambient
temperatures ranging from 16 °C to 38 °C.
N (temperate): This refrigerating appliance
is intended to be used at ambient
temperatures ranging from 16 °C to 32 °C.
SN (extended temperate): This
refrigerating appliance is intended to be
used at ambient temperatures ranging from
10 °C to 32 °C.
Important installation instructions
This appliance is designed to work in
difficult climate conditions and is powered
with 'Freezer Shield' technology which
ensures that the frozen food in the
freezer will not defrost even if the ambient
temperature falls as low as -15 °C. So
you may then install your appliance in an
unheated room without having to worry
about frozen food in the freezer being
spoilt. When the ambient temperature
returns to normal, you may continue using
the appliance as usual.
3.5 Accessories
Visual and text descriptions in the
accessories section may vary according
to the model of your appliance.
3.5.1 Ice Tray (In some models)
• Fill the ice tray with water and place in
the freezer compartment.
• After the water has completely frozen,
you can twist the tray as shown below to
remove the ice cubes.
3.5.2 The Storage Box
You can adjust and use this department for
2 different functions.
Sliding cover
Your fridge is delivered to you with the
cover shown in the open position.
Declared energy consumption and volume
are defined according to the Chiller option
of the product.
To use for 0 °C department:
If you want to use this compartment as a
0 °C box, you must take the sliding cover
(indicated in the picture) from the closed
position to the open position.
To use for Crisper department:
If you want to use this compartment as a
Crisper, you must take the sliding cover
(indicated in the picture) from the open
position to the closed position.
While this department is used as a 0
°C department, keeping food in the
Chiller, compartment instead of the freezer
or refrigerator compartments, allows food to
retain freshness and flavour for longer,
EN - 40
(The images are representative)