Publicidad
Idiomas disponibles
Idiomas disponibles
Door reversal instructions
To reverse the door, you will need to tilt the product back to access the bottom hinge that holds the
screws. Do not tilt the product more than 45 degrees or lay it flat.
For your own safety, a minimum of 2 people should lift or tilt this product.
Tools required:
Phillips screwdriver, flat-blade screwdriver and hexagon or socket span-
ner.
1. Remove the 4 screw hole covers from the top and bottom of the front
door of the product.
2. With the door closed, remove the top and bottom hinge screws securing the product door to the hin-
ges. Remove the top hinge screws first.
3. Support the door at the bottom and open the hinges to separate them from
the product door. Carefully lift the door off the product,
making sure not to damage the hinges or the door.
4. Remove the 4 screw hole covers from the top and bottom of the product
casing on the side opposite to where the hinges are attached.
5. With the top hinge open, remove the top hinge screws securing it to the product cabinet.
37
English
infiniton.es
Publicidad
