Phocos CIS-N-LED Serie Manual De Instrucciones página 25

LED Driver Description
Output voltage up to 49 V

5 to 15 LEDs in series for 12 V system, 10 to 15 LEDs in series for 24 V system

Nominal output current: 350 mA, 600 mA, 700 mA, 1050 mA, 1400 mA, 2800 mA

(depending on the type)
Two timer inside to control LED brightness

PIR Input: Switches the LED driver to the nominal output current (100% brightness). To be

used with an external motion detector.
Dimming Function (output "logics")
Timer 1
Timer 2
The timer and dimming settings can be adjusted using the CIS-CU-LCD (Infrared remote
control) or MXI-IR (Infrared to USB adapter) and CISCOM (PC-program).
Input for a signal from a motion sensor (PIR), to override the dimming and set the light to full
brightness in case a person is detected.
In this way, one can set a low dimming level to ensure a minimum light level, for sufficient
orientation and to save energy.
When a motion is detected, the light is switched to 100%.
on
on
on
off
23
off
N/A