Philips AUT1211 Manual página 119

b. Insira a porca da válvula de esfera de três vias no tubo de polietileno de 1/4" e insira o tubo
no conetor convexo da válvula de esfera de três vias. Aperte a porca com uma chave inglesa.
c. Instale a válvula de esfera de três vias na válvula de água fria. Não esqueça de colocar o anel de
vedação no interior da válvula de esfera de três vias durante a instalação.
Notes:
• Before installation, it is important to check the condition of the system to make sure it has not been
damaged during transport.
• Unpack the system and its accessories. Remove the protective packaging material. Recyclable
materials have been used for the packaging and should be disposed of in the appropriate recycling
bins or at the speci c local recycling center.
WARNING: Keep plastic bags out of the reach of children, as theymay be
dangerous.
d. Conecte a mangueira de água fria à válvula de esfera de três vias e aperte-a bem com uma
• Check if anything is missing according to the packing list and the overview.
chave inglesa. Fique atento ao anel de vedação na mangueira de água fria durante a instalação.
• Given that the system will improve the quality of your drinking water, all tools to be used in the
installation process should be clean, rust and grease-free.
• The installation process should be carried out under appropriate hygienic conditions, taking all
necessary precautions concerning materials and components that will come into contact with
water to be treated or consumed.
• Avoid external contamination of the system through improper handling, using gloves, sanitizing
gel, and washing hands as often as is necessary during the installation process, rst use, and system
maintenance.
(1)
Anel de vedação
(1)
Anel de vedação
(2)
(2)
119