Philips AUT1211 Manual página 13

VII. Precautions
- Always use municipal tap water as the water source. Do not use water that is micro-biologically
unsafe or of unknown quality without adequate disinfection before or after the system.
- This system is not intended for use by persons (including children) with reduced physical sensory or
mental capabilities, or lack of experience and knowledge unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the system.
- Be sure to handle the system gently and carefully. Do not attempt to modify or repair the system
yourself, otherwise, the warranty becomes invalid.
- This device is intended for domestic use only.
- The inlet water temperature of the system should be within 5-38°C . When the inlet water
temperature exceeds 38°C, the �lter could be damaged and become invalid. If the inlet water
temperature is lower than 5°C, it may cause freezing and the parts of the system to rupture,
resulting in water leakage.
- Do not reverse the installation order of the �lter cartridges to avoid affecting the lter performance
of the system.
- If turn on the faucet to empty the system.
- Events of faults include:
· Leakage
· The product is cracked or damaged
· There is an abnormal sound
· The machine does not work
Please contact consumer care for inspection immediately.
- If not using the system for an extended period, turn off the water supply, and turn on the faucet to
release the internal pressure to avoid damage to the system.
13