Publicidad
Idiomas disponibles
Idiomas disponibles
2. Filter lifetime
• The system and installation shall comply with applicable local regulations.
• The system and installation shall comply with applicable local regulations.
Note:
• This product cannot be disposed of with other domestic waste products.
• This product cannot be disposed of with other domestic waste products.
For the best performance, please change your �lter cartridge according to the �lter lifetime indicator,
At the end of the product's service life, it should be returned to the place of purchase, or at a local
At the end of the product's service life, it should be returned to the place of purchase, or at a local
or the �lter replacement cycle suggested below. When a signi�cantly lower �ow rate is observed, we
recycling center, indicating that it contains electric and electronic components. The appropriate
recycling center, indicating that it contains electric and electronic components. The appropriate
recommend changing the �lters as well.
collection and treatment of the product, which no longer are to be used, contributes to the
collection and treatment of the product, which no longer are to be used, contributes to the
This system can only work with Philips �lters.
preservation of natural resources and avoids any potential public health risks.
preservation of natural resources and avoids any potential public health risks.
Household size
1
2
3
4
* The actual lifetime of the �lter cartridge depends on the local tap water quality and daily usage. The
recommended replacement cycle is an average based on different local tap water quality. If the local
tap water quality is below the average, the actual lifetime of the cartridge would differ from the
recommended replacement cycle. If the �lter cartridge is blocked, please replace it.
3. Filter cartridge replacement
a. Turn off the water supply before replacing the lter cartridges.
b. Remove the front cover.
c. Turn the �lter cartridge that needs to be replaced counterclockwise and pull it out.
d. Remove the packaging of the new �lter cartridge and insert it into the system. Rotate clockwise to
align the triangle icon on the �lter cartridge with the lock icon on the system.
e. Turn on the faucet. Let water run for a minimum of 10 minutes to �ush away air and carbon
compounds from the �lter.
Resin �lter pack lifetime (Model Code: AUT820IEX/10)
Very hard water
area (above 303)
6 months
3 months
2 months
1.5 months
1
2
3
Medium - Hard water
area (178-303)
10 months
5 months
3 months
2 months
2
1
12
Carbon �lte r lifetime
(Model Code: AUT811/10)
24 months
20 months
12 months
10 months
Publicidad
