THERMEx Sirocco Instrucciones De Montaje página 38

The extraction can now be set manually, if
desired. See 'Operating the extractor unit'.
Ÿ
After 10 seconds the slide control will switch
off and the cooking time counter is hidden.
8.2 Boost
You can use the boost function to cook for max.
5 minutes at the highest cooking level. You can
use the Boost function for a maximum of two
cooking zones alongside each other at the
same time.
1. Touch power level P to select the Boost
function.
Ÿ
'P' shows on the display.
Ÿ
After the maximum boost time the power will
be reduced to power level 9.
8.3 Pan detection symbol
When the pan detection symbol appears in the
display:
Ÿ
you have not placed a pan on the correct
cooking zone;
Ÿ
the pan you're using is not suitable for
induction cooking;
Ÿ
the pan is too small or not properly centred
on the cooking zone.
The cooking zone will not work unless there
is a suitable pan on the cooking zone.
8.4 Finish cooking
1. Set the power level to '0' to switch off the
cooking zone.
2. Switch off the induction hob by touching the
On/off key.

Symbol H will appear in the display of the
38 EN
cooking zone which is too hot to touch. The
symbol disappears when the surface has
cooled down to a safe temperature. It can also
be used as an energy saving function; if you
want to heat other pans, use the cooking zone
that is still hot.
8.5 Switch on the
automatic heat-up function
This function sets the cooking zone at the
highest level in order to bring your pan rapidly
up to the required temperature. After a given
time interval, the power level returns to the
established level. This function is available for
power level 1 to 8.
Heat-up Automatic time
Power level
(seconds)
1 48
2 144
3 230
4 312
5 408
6 120
7 168
8 216
9 not available
P not available
1. Switch on the hob and select the desired
cooking zone .
2. Touch and hold the slide control for at least 3
seconds at the desired level (from 1 to 8).
Ÿ
An 'A' appears in the display alternating with
the selected power level. When the
automatic heat-up time has expired, the
cooking zone will switch automatically to the
selected level which will show permanently
on the display.
3. To stop the automatic heat-up function,
select the cooking zone and touch the slide
control.
8.6 Switch on the keep
warm function
1. Switch on the hob and put a suitable pan on
a cooking zone.
2. Touch the cooking zone key of the desired
cooking zone.
Ÿ
The '0' of the selected cooking zone will light
up clearly and a single beep sounds.
3. Touch the keep warm key.
Ÿ
The keep warm symbol 'u' appears in the
display. The keep warm function is selected.