THERMEx Sirocco Instrucciones De Montaje página 39

4. Set the power level to '0' or touch the keep
warm key to switch off the keep warm function.
8.7 Connecting the Bridge
induction cooking zones
Two Bridge induction cooking zones can be
connected to each other. This creates one large
zone that can be used, for example, with a grill
plate or a fish pan on the same power level.
The pan must be large enough to cover the
centres of the front and rear bridge induction
cooking zone (at least 23 cm).
Connection of Bridge induction cooking
zones
1. Switch on the hob.
2. Simultaneously touch the left-hand side or
right-hand side cooking zone keys.
Ÿ
The rear cooking zone display shows a
connection symbol to indicate that the two
cooking zones are connected.
3. Set the power level by touching the slide
control.
Ÿ
The front cooking zone display shows the
power level.
Disconnection of Bridge induction cooking
zones
1. Simultaneously touch the cooking zone keys
of the connected cooking zones.
Ÿ
The connection symbol will disappear on the
rear cooking zone display.
8.8 Pause cooking
This function stops the cooking activity
temporarily (max. 10 minutes); timers are also
paused.
1. Touch the pause key for at least 1 second.
Ÿ
All the displays show the pause symbol.
2. To continue cooking, touch the pause key for
at least 1 second until it flashes.
3. Touch any other key within 10 seconds and
the cooking process will continue.
Ÿ
The hob will automatically switch off after 10
minutes if the pause function is not switched
off in the meantime.
EN 39