Hilti TE 700-AVR Manual Original página 20

1 Grease
1 Cleaning cloth
1 Operating instructions
1 Hilti toolbox
2.11 Using extension cords
en
Use only extension cords of a type approved for the application and with conductors of adequate cross section.
The power tool may otherwise lose performance and the extension cord may overheat. Check the extension
cord for damage at regular intervals. Replace damaged extension cords.
Recommended minimum conductor cross section and max. cable lengths
Conductor cross section
Mains voltage 100 V
Mains voltage 110-120 V
Mains voltage 220-240 V
Do not use extension cords with 1.25 mm² conductor cross section; 2.0 mm² conductor cross section.
2.12 Using extension cords outdoors
When working outdoors, use only extension cords that are approved and correspondingly marked for this
application.
2.13 Using a generator or transformer
This power tool may be powered by a generator or transformer when the following conditions are fulfilled:
The unit must provide a power output in watts of at least twice the value printed on the type identification
plate on the power tool. The operating voltage must remain within +5% and -15% of the rated voltage at all
times, frequency must be in the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with
automatic voltage regulation and starting boost.
Never operate other power tools or appliances from the generator or transformer at the same time. Switching
other power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in
damage to the power tool.
3. Accessories, consumables
Designation
TPS Theft Protection System
with Company Card, Company
Remote and TPS‑K key
Dust removal module
Use the Hilti chisels or other tools listed below. With these you will achieve higher performance and
longer lifetime as the power tool and chisels have been optimized as a system.
Pointed chisels
20
1.5 mm²
30 m
Designation
TE DRS‑B
TE‑Y chuck /
tool descrip- Width (mm)
tion
TE‑YP SM 28
TE‑YP SM 36
2.5 mm² 3.5 mm²
30 m
20 m
50 m
Item number, description
206999, optional
Width in
Length (mm)
inches
280
360
Length in
inches
11
14