HSM HSM1292 Instrucciones De Servicio página 12

3
Machine components
1 2 3 4 5 6
1 Cut material container
2 Feed opening
3 Safety instructions
4 LEDs
Paper shredder is ready for operation.
Cut material container full or open
5 Rocker switch
: On
: Off, Reverse
6 Name plate
4 Scope of delivery
• Paper shredder, ready for connection, in
carton packing
• 5 Bags for shredded material
• Special cutting block oil 50 ml (cross cut)
• Operating instructions
Acces so ries
• 10 waste bags, order no. 1.661.995.150
• Special cutting block oil 250 ml
order No.: 1.235.997.403
See page 68 for our customer service ad-
dresses.
08/2011
5 Operation
HSM GmbH + Co. KG
Austrasse 1-9
88699 Frickingen / Germany
Switching the paper shredder on
Feed paper
system and shredded.
again, the cut ting sy stem au to ma tical ly
swit ches off af ter app rox. 3 sec. and returns
to standby.
Shredding CDs and credit cards (see
"Proper Use")
Insert CD/credit card in centre of the feed
opening.
Swit ching paper shredder off
Classic 105.3
english
WARNING
Before switching the machine on,
make sure that you observe all
safety instructions.
• Press rocker switch
Rocker switch locks in place.
Green LED lights.
Paper shredder is ready for op-
eration (standby).
• Insert the paper to be de-
stroyed. See "Technical data"
for sheet capacity.
The shredding pro cess is
star ted by a pho to –cell in the
paper feeding opening.
Paper is pulled into cutting
When the paper fee ding opening is free
WARNING
Depending on the type of material,
splinters could be produced when
shredding CDs. For this reason,
wear protective goggles.
• Tap rocker switch
Switch returns to ze ro po si ti on.
.
.
11