Bergstrom EVER Manual De Usuario página 17

CONTROL PANEL OPERATION
6 7
1
ON/OFF: Cooler unit On/Off button. Pressing once turns the unit on and leaves it ready for
operation. The unit goes off when pressed with the cooler on.
Pressing and holding the On/Off button turns the LED on at maximum brightness; holding
it down gradually decreases brightness by approximately 20% every half second; and
releasing the button will maintain the same brightness as the LED.
2
MODE: Select the unit's operation mode from between AUTO, MANUAL and FAN.
Operation modes:
- AUTO: Automatic operation: Allows flow temperature to be selected between 18 and 27
ºC (64.4 - 77 ºF). The user can select unit operation from 8 different blower speeds. While
the unit is running in automatic mode, the display will switch between showing blower
speed and supply air temperature every 5 seconds.
- MANUAL: Manual operation: The user can select from 8 different blower speeds with the
cooler operating at maximum capacity. The display will only show the selected blower
speed while the unit is running in manual mode.
- FAN: Fan function: Allows blower speed to be selected from 8 speeds. In this operation
mode, the cooler will only supply ambient temperature air.
3
Button to increase temperature selection by 0.5 ºC in AUTO mode, time in AUTO-OFF
SETTINGS, and blower speed in AUTO, MANUAL and FAN modes. In AUTO mode, a long
press increases blower speed. Each press in AUTO-OFF SETTINGS mode increases auto-off
time by 15 min.
4
Button to reduce temperature selection by 0.5 ºC in AUTO mode, time in AUTO-OFF
SETTINGS, and blower speed in AUTO, MANUAL and FAN modes. In AUTO mode, a long
8 11 9
1 2 3
USER'S HANDBOOK
10 12
4 5
EVER EN
13
TU ESPACIO DE VIDA CONFORTABLE
17