Publicidad
Idiomas disponibles
Idiomas disponibles
Armada Technologies
Power Down: allows the user to select the amount of time from turn on
that the unit will automatically shut down to save battery power.
Contrast: regulates the light/dark ratio on the screen.
Backlight: sets levels of backlight brightness.
Default Mode: determines what detection mode the receiver will be
in when it is turned on.
The features above are similar to the transmitter with the exception
of the default mode. To use default mode, select the receiver mode
that you wish the receiver to default to when it powers up, which is
usually the mode most used.
Tracing Wire -
verified to have a good ground with power set, turn on the receiving wand.
The receiver defaults to the most recently used mode with null antenna
POWER DOWN
ON, 30 MIN, 15 MIN, 5 MIN
BLUETOOTH
Not Used Currently
CONTRAST
1 – 8
BACKLIGHT
1 – 4
DEFAULT MODE
DIRECT LO-F
DIRECT HI-F
PASSIVE AC
CLAMP-BCAST
After the transmitter has been properly connected and
Pro900™ LOCATOR USER GUIDE
11
Publicidad
