Publicidad
Idiomas disponibles
Idiomas disponibles
Armada Technologies
Transmitter Operation –
Pro900™ Transmitter Display Operation
Turn the Transmitter ON by holding down the ON button for at least one
second. After a momentary banner screen, you will see the HOME display.
From here you can elect to use the Broadcast or Clamp connectionless
mode or the Direct Clip-on mode.
DIRECT CLIP-ON:
controllers, lighting transformers or telecom equipment are disconnected
from wires that are to be traced by direct connection. The output voltage
on the Direct Connect leads can be in the hundreds of volts. Before
selecting Direct Clip-on connect the red alligator lead to the wire you want
to trace (target wire) and the black alligator lead to the included ground
stake. Insert the ground stake into the soil or earth ground perpendicular
to the path of the wire and as far from the transmitter as possible. Do not
use common grounds such as pipes or electrical grounds unless you have
Pro900™ LOCATOR USER GUIDE
Be sure that any equipment such as irrigation
6
Publicidad
