Final Preparation; Optional Interconnect Gas Kit - Garland GF24 Serie Instrucciones De Instalación Y Operación

INSTALLATION Continued
The appliance pressure regulator provided by the factory
is pre-set to the correct manifold pressure. The manifold
pressure may require verifi cation and adjustment at the
installation. Allow at least one burner to be ignited and
operating while checking manifold pressure at the test
spigot located on the appliance manifold, and adjust the
appliance pressure regulator accordingly.
The appliance and its individual shut-off valve must be
disconnected from the gas supply piping system during any
pressure testing of that system where pressures are in excess
of 1/2 PSIG (3.45kPa.)
5
TO INLET OF SALAMANDER/
CHEESEMELTER MANIFOLD
8
ATTACH SUPPORT CLAMP (ITEM 7 - 2640800)
TO SUPPORT BRACKET ( ITEM 6 - 2640700)
WITH (2)#10-24 SELF-TAPPING SCREWS (ITEM 12
F32 - NOT SHOWN) PROVIDED.
MARK HOLE LOCATIONS AND MOUNT
SUPPORT BRACKET (ITEM 6 - 2640700) TO RANGE
BACK WITH (2)#10-16 TEKS SELF-DRILL/TAP
SCREWS (ITEM 11 - F67 - NOT SHOWN) PROVIDED.
15 4531608
14 G01738-11
13 2127503/2127500 6.0"wc 3/4"NPT REG. NATURAL GAS/10"wc 3/4" NPT REG. PROPANE GAS - SUPPLIED WITH SALAMANDER/CHEESEMELTER
12 F32
11 F67
10 G03716-1
9 G01738-5
8 G01474-9
7 2640800
6 2640700
5 3013000
4 G01963-1
3 G01474-5
2 G01738-14
NAT: 2127502/4525047
1 4.5"wc 3/4"NPT/3/4" ISO 7-1 REG. NATURAL GAS OR 10"wc 3/4"NPT/3/4" ISO 7-1 REG. PROPANE GAS - SUPPLIED W/RANGE
PRO: 2127500/4525048
ITEM NO. PART NUMBER
Page 12
REGULATOR - 6.0"w.c. NATURAL GAS
OR 10.0"w.c. PROPANE GAS
(SUPPLIED WITH SALAMANDER/
CHEESEMELTER)
13
3/4" X 51" X 33" TUBING
3/4" NPT X 3.5" PIPE NIPPLE
SCREW-10-24X1/2" PAN HD SELF-TAP TYPE F (NOT SHOWN)
SCREW - #10-16 X 1/2" HEX WASHER HEAD TEKS SELF DRILL/TAP (NOT SHOWN)
3/4" NPT X 3/4" NPT X 1" NPT REDUCING TEE
3/4" NPT X 6.5" PIPE NIPPLE
3/4" NPT X 1/2" NPT 90 DEG. REDUCING ELBOW
PIPE SUPPORT BRACKET CLAMP
PIPE SUPPORT BRACKET
3/4" CC X 3/4" NPT STRAIGHT FITTING
3/4" NPT PIPE UNION
90 DEGREE ELBOW 3/4" NPT (ONE SUPPLIED WITH RANGE)
3/4" NPT X 2IN PIPE NIPPLE (ONE SUPPLIED WITH RANGE)

Final Preparation

NOTE: Your new range has a plastic coating to help protect
the fi nish from scratches during shipping. This protective
plastic fi lm should be peeled off prior to starting the range.

Optional Interconnect Gas Kit

To interconnect range mount salamanders with range
The GF series Garland range can be equipped with a range
mount gas salamander. Salamanders can be plumbed
independently or be interconnected with the range. See
Drawing for various options for mounting onto a 36"
(900mm) a 48" (1200mm) or a 60" (1500mm) range.
CUT TUBING (ITEM 15 - 4531608) TO SIZE AS REQUIRED
TO SUIT SALAMANDER/CHEESEMELTER TOP OR REAR
MANIFOLD INLET CONNECTION
15
3
SUPPLIED WITH RANGE
5
2
SUPPLIED WITH RANGE
REGULATOR - 4.5" w.c. NATURAL GAS
OR 10.0" w.c. PROPANE GAS
(SUPPLIED WITH RANGE)
1
2
9
4
2
10
14
3
DESCRIPTION
TO INLET OF RANGE
MANIFOLD
7
1" NPT GAS SUPPLY
CONNECTION
1
1
1
2
2
1
1
1
Optional Interconnect Gas Kit
1
1
36in (900mm) G/U/X
2
1
Part # 4531606
2
3
1
QTY
Part # 4525587 Rev 4 (29 April 14)
6