Arzum OKKA RICH SPIN PRO Manual De Uso página 32

AUTO BREWING ALTITUDE DETECTION
SYSTEM SETTING
Arzum OKKA Rich Spin Pro has a smart auto brewing altitude detection
system that detects the ideal brewing temperature at its location and
enables you to make Turkish coffee with the same flavor anywhere in
the world.
The boiling point of water depends on the difference in altitude relative
to sea level. Therefore, when the altitude at which your appliance is
used changes, you can manually adjust the brewing point of your
appliance.
a. Plug the appliance into the socket.
b. Press the On/Off button (rotary knob) on the panel.
c. All LEDs on the panel will flash and a double beep will sound.
d. Select the slow brew mode ( )by turning the rotary knob. Do not
press.
e. Remove the coffee pot and press the rotary knob briefly.
f. After the beep, the LED for the Slow brew mode will start blinking, then
the manual calibration mode will be active.
g. Pour water into the coffee pot up to the MAX level and insert the
coffee pot into its slot.
h. Wait until the water in the coffee pot boils.
i. When the calibration process is finished, your device will beep for 5
seconds and the Slow brew LED light will flash.
j. When you remove the coffee pot from its slot, your product will beep
once and all the LEDs will turn off.
BREWING TEMPERATURE SETTING
You can increase or decrease the temperature of coffee brewing as you
wish, bringing it to the desired temperature.
Increasing the temperature:
• Plug the product into the socket.
• Press and hold the On/Off button (rotary knob).
• All LEDs on the panel will flash once and a double beep will sound. •
Remove the coffee pot from its slot.
• Select the Milk Coffee mode ( ) by turning the rotary knob. Do not
press.
32 ARZUM OKKA RICH SPIN PRO