Arzum OKKA RICH SPIN PRO Manual De Uso página 39

EN
7. After brewing process has finished, your appliance will give warning
beep for 5 seconds and the LED light and ambient lighting for the
selected brewing mode will flash.
8. After brewing process has finished, you can serve your beverage by
pouring into the cup.
9. If you displace the coffee pot before the brewing process is over,the
red colored warning light that coffee pot is not in its place and all
function lights will flash and your appliance will give a warning sound
and finish the brewing process.
If the coffee pot is put back after being removed, the brewing process
will not continue.
9. MILK WARMING
To warm the milk;
1. Plug in your appliance.
2. Press and hold the On/Off button (rotary knob) on the panel.
Note: Pay attention not to exceed amount of milk beyond the MILK level
line in the coffee pot as the size of cups you are using may differ.
3. Insert the coffee pot into the machine.
Note: If the Coffee pot is not in the place or not place in its slot, all LEDs
on the control panel will remain off but coffee pot is not in the place
warning light and ambient lighting will continue to light
4. Turn the rotary knob to select the Milk Warming mode ( ) and
press.
5. When any brewing mode is selected, a beep will sound and only the
blue led for the selected brewing mode will remain on and the brewing
process will start.
6. After warming process has finished, your appliance will give warning
beep for 5 seconds and the LED light and ambient lighting for the
selected brewing mode will flash.
ARZUM OKKA RICH SPIN PRO 39