KTM A46002922044 Instrucciones De Montaje página 21

–
Remove screws
502593-01
–
Mount steering damper
ded) on lower part of steering damper bracket
but do not tighten yet.
The bracket collar faces towards the steering damper.
–
Mount lower part of steering damper bracket
4
screws (included), but do not tighten yet.
502594-01
–
Position steering damper
2
bracket .
–
Mount and tighten screw
Guideline
Screw, steering
damper
–
Tighten lower screw
Guideline
502595-01
Screw, steering
damper
–
Tighten screws
Guideline
Screw, steering
damper bracket
–
Route wiring harness
if necessary.
–
Secure the cable in the bracket.
Guideline
Make sure that the cables are not trapped or damaged.
502596-01
Final steps
–
Install the start number plate (see Owner's Manual).
8
.
1
(included) with screw
1
on upper part of steering damper
5
.
M6x25 8 Nm (5.9 lbf ft)
5
.
M6x25 8 Nm (5.9 lbf ft)
4
.
M6x20 8 Nm (5.9 lbf ft)
9
upwards and secure with a cable ties
ASSEMBLY 5
5
(inclu-
3
(included),
3
with
Loctite ® 243™
Loctite ® 243™
Loctite ® 243™
9