Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
4. Installing the mulch plug
•
Remove the grass catcher.
•
Open the rear discharge door and hold it.
•
Hold the mulch plug (N) by its handle and fit it
in the discharge chute.
•
Close the rear discharge door.
5. Setting the cutting height
The product can be set to different cutting heights.
•
Pull the height adjustment lever (F) rearward
to increase the cutting height.
•
Pull the height adjustment lever (F) forward to
decrease the cutting height.
6. Installing / removing the battery
6a. To install battery
•
Lift and hold up the battery door (E).
•
Align the ribs on the battery pack with the
grooves in the battery compartment.
•
Push the battery pack into the battery
compartment until the battery pack locks into
place.
•
When you hear a click, the battery pack is
installed.
Note: The product has an automatic switch
function that lets the other battery work when the
first cannot operate.
4
5
6a
14
N
2 2
F
1 1
E
Publicidad
