Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
1. Replacing the cutting blade
WARNING
Always protect your hands by wearing heavy gloves and/or wrapping the cutting edges with rags or
other materials when performing any maintenance on the blades. Always remove the battery when
servicing or transporting the mower.
1a. Using wood to prevent the movement
•
Stop the product.
•
Make sure that the blades fully stop.
•
Remove the safety key and battery pack.
•
Turn the product to its side.
•
Use a piece of wood to prevent the movement
of the blade.
•
Remove blades with a wrench or a socket
(not included).
1b. Removing the old blades and installing the
new blades
•
Turn nuts to remove spacers, blades, locating
pins and blade fixed bases.
•
Install the new blade following the specified
sequence: blade fixed base, locating pin,
blade, spacer, and blade nut. Make sure that
the pins engage the holes in the blades and
position the blade with the cutting edges
toward the ground.
•
The right side of the blade is also installed in
the same way.
Note:
•
The blade fixed bases of the left and right blade cannot be used interchangeably due to their
different shapes.Mounting nuts, spacers and locating pins of blade are interchangable with that of
right blade.
•
If the pin breaks, you can use a hard object to push the broken pin out from the hole on the back
of the fixed base.
1a
1b
19
Publicidad
