Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
•
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-
related hazards.
•
Do not let familiarity gained from frequent use of products allow you to become
complacent and ignore tool safety principles. A careless action can cause severe injury within
a fraction of a second.
Product use and care
•
Do not force the product. Use the correct product for your application. The correct product
will do the job better and safer at the rate for which it was designed.
•
Do not use the product if the switch does not turn it on and off. Any product that cannot be
controlled with the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source and/or remove the battery pack, if detachable,
from the product before making any adjustments, changing accessories, or storing
Products. Such preventive safety measures reduce the risk of starting the Product accidentally.
•
Store idle products out of the reach of children and do not allow persons unfamiliar with
the product or these instructions to operate the product. Products are dangerous in the
hands of untrained users.
•
Maintain products and accessories. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the product's operation. If
damaged, have the product repaired before use. Many accidents are caused by poorly
maintained products.
•
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
•
Use the product, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the
product for operations different from those intended could result in a hazardous situation.
•
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
Battery tool use and care
•
Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
•
Use products only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
•
When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
•
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
•
Do not use a battery pack or product that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
•
Do not expose a battery pack or product to fire or excessive temperature.
Exposure to fire or temperature above 130 °C may cause explosion.
NOTE: The temperature "130 °C" can be replaced by the temperature "265 °F".
•
Follow all charging instructions and do not charge the battery pack or product outside
the temperature range specified in the instructions. Charging improperly or at temperatures
outside the specified range may damage the battery and increase the risk of fire.
8
Publicidad
