Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS MANUAL
DISASSEMBLY
After using the GEYSER, clean any liquid left on the machine. Smoke liquid corrodes metals.
It is recommended to empty the liquid tank after using the machine and before storing it to avoid acci-
dental spills.
Let the machine cool before storing it.
OBSERVATIONS
*GEYSER cannot be mounted upside down.
*Whenever you fix the machine at a height, you must secure it with a safety cable appropriate to its wei-
ght. GEYSER includes a safety ring to fix the safety cable and which can be screwed into any of the anchor
holes (20).
Do not connect the machine to unstable power sources (current generators or others) and ensure that
the power outlet is equipped with a ground connection.
GEYSER always tries to maintain the optimal temperature to generate smoke. If consecutive shots are
made in a short time or for a long time, the temperature may decrease below 90% and the machine will
block the firing function to prevent non-atomized liquid from coming out. At that moment it will indicate
that it is heating with the message "Warm up" intermittently on the main screen. As soon as the tempera-
ture reaches 90% again, the shooting function will be unlocked.
GEYSER is prepared to be used with FGEYSER-5L liquid. The use of other liquids could cause ejections of
hot, non-atomized liquid due to possible different atomization temperatures of the different liquids, as
well as blockages in the internal circuit.
MAINTENANCE
GEYSER requires cleaning the internal circuit every one or two months. To do this, make a mixture of 35%
cleaning vinegar and 65% distilled water, place it in the tank and take several long shots with the machine
placed horizontally. Do the cleaning process in a place where it cannot harm anything or anyone.
8
Publicidad
