Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS MANUAL
ERROR MESSAGES
GEYSER may present different error messages:
E1 – Pressure failure. Check whether the machine tank contains smoke liquid. If it does not have one,
refill the tank and restart it. If the tank has liquid, it may be a pump failure. In this case, contact your
distributor.
E2 – Temperature sensor failure - Contact your distributor.
E3 – Circuit failure – Contact your dealer.
E6 – Heating failure - May be due to unstable supply voltage. In this case, connect the machine to a stable
power outlet. If the machine is connected to a stable power outlet and continues to display E6, there may
be a fault in the heating module. In this case, contact your distributor.
CAUTION
GEYSER has been designed for the use described. Any other use will exclude the manufacturer from all
liability and warranty.
Do not wet the equipment. For cleaning use a damp cloth and dry immediately.
Do not use the equipment in environments with explosive or flammable gases.
Keep children and other personnel not involved in using the equipment at a minimum distance of 2 m.
Always use GEYSER only in well-ventilated spaces.
Never cover the smoke outlet nozzle or the ventilation grilles of the machine.
Do not touch the smoke outlet nozzle when the machine has warmed up.
Always use FGEYSER-5L consumable liquid. Other consumables could clog the machine or cause it to
malfunction. The use of liquids not intended for GEYSER will invalidate the warranty.
Do not add additives to the FGEYSER-5L consumable liquid (aromas, colorants,...)
Never fill the GEYSER tank with flammable liquid.
Do not fill the tank above the maximum level mark.
If you detect any malfunction, stop using GEYSER and contact your dealer.
Do not attempt to disassemble or repair the equipment. Any tampering will void the warranty.
Only an adult and qualified person should handle the equipment.
9
Publicidad
