Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
OPERATION OF YOUR FAN
SPEED CONTROL
•
The speed control is located on the top right side of the unit. Turn the knob to
move from 0 (OFF) to either 1 (LOW), 2 (MEDIUM) OR 3 (HIGH).
•
Turn the knob to the OFF position at any time to power off the unit.
0-OFF
1-LOW
2-MEDIUM
3-HIGH
WARNING: To avoid injury when directing airflow, do not rest hands on base while
pushing on guards.
ASSEMBLY INSTRUCTIONS
Simple assembly is required to use this fan on a table or floor. Plastic feet are
provided for required stability, and must be installed to ensure safe operation. Insert
each one of the feet into one of the two slots located on the bottom side of the metal
fan housing. Snap legs to fan cradle. Short side of base leg should face the front of
the fan, long side should face the back of the fan.
Stabilizing Feet
Page 5
Publicidad
