Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
REPLACING THE FUSE
CAUTION:
•
Turn off fan and disconnect plug from power source before replacing fuse.
•
Open fuse cover located on the side of the power cord plug by sliding it toward
the plug blades
•
Remove fuse carefully by taking a small tool and slowly prying out one end. Once
you have one end out, slowly pry out the other end.
•
To avoid the risk of fire, replace only with 2.5 Amp, 125V fuse.
•
Close fuse cover by sliding cover toward the top of the plug.
CAUTION: Risk of fire. Do not replace attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if the attachment
plug is damaged.
Fuse cover
Page 6
Fuse
Publicidad
