Tognana IRIDEA D2DFU01IRRO Manual De Usuario página 18

COMPONENTS
BEFORE FIRST USE
1. Extract the various components from the packaging, check that they are intact and complete,
gently remove any protections and labels. The packaging includes:
•
No. 1 Complete blender
•
No. 1 User Manual
2. Check that all the parts are properly assembled and in position before use.
3. Before using the appliance, it is recommended to wash all removable parts that will come into
contact with foodstuffs, following the instructions in the section, "CLEANING AND
MAINTENANCE".
ASSEMBLY
1. Place the sealing ring (4) on the inner edge of the blade assembly (5).
2. Insert the blade assembly (5) with the sealing ring in the base of the carafe (6).
3. Place the glass carafe (3) on its base and turn it clockwise to secure it.
4. Place the carafe assembly on the base, turning it clockwise.
5. Insert the ingredients in the carafe, making sure not to exceed the maximum capacity, and secure
the lid (2) on the carafe by pressing it down.
6. Insert the dosing cap (1) in the opening in the lid and turn it clockwise until it clicks in.
7. Check that the ON-OFF control is set to "0".
8. Place the carafe assembly (9) on the motor body (8) and turn it clockwise until it clicks in.
9. After use, carry out the procedure in reverse to disassemble the appliance.
SAFETY SYSTEM
This appliance has two safety devices, one on the lid and one on the blade assembly.
The appliance only works if the carafe assembly is properly inserted on the motor body and if the lid
is properly inserted on the carafe.
If the glass and lid are removed, the appliance turns off.
1. Dosing cap
2. Lid
3. Glass carafe
4. Carafe sealing ring
5. Blade assembly
6. Carafe base
7. ON-OFF control
8. Motor body
9. Carafe assembly
18