Descargar Imprimir esta página

Craftsman CMCL020 Manual De Instrucciones página 4

Linterna led de 20v máx
Ocultar thumbs Ver también para CMCL020:

Publicidad

Idiomas disponibles

Idiomas disponibles

ENglish
the risk of injury, only CRAFTSMAN recommended accessories
should be used with this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN, call 1‑888‑331‑4569.
VersaTrack™ (Fig. D )

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect power source
before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can
cause injury.

WARNING: To reduce the risk of serious personal
injury, do not use a damaged VersaTrack™ hang hook
or VersaTrack™ Trackwall. A damaged VersaTrack™ hang
hook or VersaTrack™ Trackwall will not support the weight
of the tool.

WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the accessory is
securely tightened.

WARNING: To reduce the risk of serious personal
injury, DO NOT suspend tool overhead or suspend
objects from the hang hook. ONLY hang tool's hang hook
on the VersaTrack™ Trackwall.

WARNING: Ensure that the tool weight does not
exceed the maximum rated weight for the selected
Versatrack hook.

WARNING: When hanging objects on the
VersaTrack™ wall, adequately space the tools in order
to not exceed 75 lb per linear foot.
iMPORTANT: When attaching the VersaTrack™ hang hook,
use only the screw that is provided. Be sure to securely
tighten the screw.
VersaTrack™ accessories mount securely to the track.
1. The VersaTrack™ hang hook 
tool using only the provided screw
hang hook is not desired at all, it can be removed from
the tool.
2. To remove the VersaTrack™ hang hook, remove the
screw that holds the Versatrack hang hook.
VersaTrack™ accessories mount compatible tools securely to
the VersaTrack™ Trackwall.
3. Turn tool off, remove accessories, and disconnect
power source.
4. Any product with exposed cutting teeth must have them
covered securely if it is to be on the VersaTrack™.
5. Clip the VersaTrack™ hang hook onto the
VersaTrack™ Trackwall.
VersaTrack™ accessories are only compatible with
VersaTrack™ Trackwall system.
NOTE: VersaTrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN; call 1‑888‑331‑4569.
Repairs
The charger and batteries are not serviceable. There are no
serviceable parts inside the charger or battery pack.

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should be
4
 can be attached to the
6
. If the VersaTrack™
7
performed by a factory service center or an authorized service
center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRANTY sERViCE: Registering your product will help
you obtain more efficient warranty service in case there is a
problem with your product.
• CONFiRMATiON OF OWNERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration of
ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification is
required under the Federal Consumer Safety Act.
Register online at www.craftsman.com/account/login.
Three‑Year Limited Warranty
For warranty terms, go to www.dewalt.com/support/
warranty.
To request a written copy of the warranty terms, contact:
Customer Service at D
WALT Industrial Tool Co., 701 East
e
Joppa Road, Towson, MD 21286 or call 1‑800‑4‑D
(1‑800‑433‑9258).
lATiN AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country-specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARNiNg lABEl REPlACEMENT: If your warning
labels become illegible or are missing, call 1‑800‑4‑D
(1‑800‑433‑9258) for a free replacement.
WALT
e
WALT
e

Publicidad

loading