Mercedes-Benz Foster MB WHP 1 Manual Del Usuario página 24

i
If an end device that has already been
coupled is within range when the
headphones are ready to be connected,
preference will be given to connecting
this end device. If you would like to
connect a different end device with the
headphones, first switch the headphones
off again and press the
5 seconds. You can then establish a
connection between the headphones and
the new end device.
Establishing a Bluetooth
via NFC
To switch on the headphones: press and
X
hold the button for 2 seconds.
Press the button twice.
X
The headphones are ready to be
connected.
NFC
Activate NFC on the end device; see
X
manufacturer's instructions.
Hold the end device up to the centre of the
X
outer side of the left earpiece.
®
Bluetooth on the end device is activated
®
and a Bluetooth connection between the
headphones and the end device is
established.
i
When a Bluetooth
established using NFC, any existing
®
Bluetooth connection at the end device
will be terminated.
Changing the language of the messages
button for
®
connection
BL UE TO
OT H
M B H
ea dp ho
ne
M+P-03F-9746
®
connection is
Automatic connections
®
Once the Bluetooth
the headphones and an end device has been
established, the connection will be
automatically established whenever the
headphones are switched on.
If several end devices are stored in the
®
Bluetooth memory of the headphones, the
headphones will first try to establish a
connection with a Rear Entertainment
System. If no Rear Entertainment System has
been saved or is available, the headphones
will try to establish a connection with another
end device.
AUX
i
As soon as the AUX cable is plugged into
the headphones, any existing Bluetooth
connection is terminated. If the AUX cable
is unplugged from the headphones, the
system automatically attempts to establish
®
a Bluetooth connection between the
headphones and the end device.
Plug the AUX cable into the headphones.
X
Plug the AUX cable into the end device.
X
Changing the language of the
messages
The messages are available in English and
Chinese.
i
The standard language is set to English
ex factory.
Press and hold the
X
5 seconds when the headphones are
switched off.
connection between
®
M+P-03F-9747
button for
23