Ryobi RRT12 Manual Del Usuario página 6

ACCESSORY
Figure
*The maximum RPM provided in the chart are recommended values only.
6
Original Instructions
Accessory
Drum sander mandrel (Ø 12.7 mm)
(Ø 3.2 mm shank/collet)
6.4 mm x 12.7 mm sanding drums
(60 grit, 120 grit, 240 grit)
used with Drum sander mandrel
6.35 mm Pointed grinding stone
9.5 mm Conical grinding stone
9.5 mm Cylinder grinding stone
3.2 mm High speed steel drill bit
Screw mandrel (Ø 3.2 mm shank/collet) Attaching to polishing wheels
12.7 mm & 25.4 mm Felt polishing
wheels
used with Screw mandrel
Standard Rotary Mandrel (Ø 3.2 mm
shank/collet)
24 mm. x .8 mm Cut-off discs
32 mm x .8 mm Fiberglass cut-off
wheel
Wire brush wheel
Wrench
Polishing compound
Application
Attaching to sanding drums
Sanding wood
Grinding metal
Drilling
Polishing and buffi ng metals,
stone, glass and ceramics
Attaching to cut-off discs and cut-
off wheels
Cutting nails, screws, thin metal,
wood, and plastic
Cutting and trimming metals,
plastics and ceramics
Brushing metal
Removing and inserting accessory
bits
Polishing and brightening metals
and plastics.
Maximum
RPM*
35K
35K
35K
35K
15K
15K
35K
35K
35K
15K
—
—