Publicidad
Idiomas disponibles
Idiomas disponibles
Adjust the mounting arms
After unpacking the light, loosen
1
both star knobs on the mounting
arms located on the back of the
fixture.
Pivot joint
Elbow joint
NOTE: The fixture must be mounted with the PIR controls facing
towards the ground for proper PIR functioning.
OPTION 1: WALL MOUNT
2a
OPTION 2: EAVE MOUNT
2b
Mounting Preparations
The arms have position hash marks to aid in the
installation for both STANDARD WALL MOUNT
and STANDARD EAVE MOUNT. By aligning the
hash marks ("-" and "="), the arm will be
positioned for two very di erent configurations.
By aligning the "-" marks on the elbow joint and
then on the pivot joint, the mounting arm is
articulated for WALL MOUNT installation. By
aligning the "=" marks on the elbow joint and
then on the pivot joint, the mounting arm is
articulated for EAVE MOUNT installation.
Align the "-" marks on the elbow joint and pivot joint. Tighten both star knobs.
Align the "=" marks on the elbow joint and pivot joint. Tighten both star knobs.
DO NOT EAVE MOUNT ON PERFORATED
OR CHANNELED SOFFIT MATERIAL!
2 WAYS TO
MOUNT:
WALL MOUNT
EAVE MOUNT
5
Publicidad
