Good Earth Lighting SE1356-WH3-02LF4-G Manual Del Usuario página 6

DANGER!
Attach the wall plate to the fixture
1
Feed the fixture wires through wall plate and thread
the wall plate onto the mounting arm.
For surface mount: Use only with an approve UL wet
location surface electrical box.
Works with most electrical boxes styles
6
How to Wire the Light
SHUT OFF POWER TO THE JUNCTION BOX
BEFORE INSTALLING THE FIXTURE.
Connect the wires using the provided wire nuts
2
Fixture must be properly grounded! Using the
provided wire nuts, connect fixture ground wire to
ground wire. These wires can be either green or bare
copper. Connect black supply lead with the black fixture
wires and white supply lead with the white fixture
wires using the wire nuts. Secure the wire nuts
properly to prevent the wires from coming loose. Push
connections and excess wires back into the
compartment.
NOTE: Ground
wires are normally
a green insulated
or bare copper
wire.