Publicidad
Idiomas disponibles
Idiomas disponibles
direct sunlight or excessive
dust.
39. Never place the unit
where it could be subject to
mechanical vibration or
shock.
40. During assembling or
disassembling the product
may not be connected to the
mains.
41. Only connect to the
mains after the product has
been fully and correctly
assembled.
42. Do not place the power
cable under a cover or under
a carpet or cover the cable
with objects. The power
cable should not cross any
passage for people to avoid
tripping hazard or product
damage.
43. Keep all packaging away
from children (plastic bag,
carton, plastic foam, etc.).
44. Never try to open up or
repair the device by yourself
as this can void the warranty
and could also result in
damage to property and
personal injury. Instead
please contact a fully
16
qualified electrician or the
retailer or our support.
45. Save these instructions.
1. Fan guard (front)
2. Fan blade
3. Screw for fan blade
4. Screws for fan guard (4x)
5. Fan guard (back)
6. Motor shaft
7. Activate/deactivate oscillation
8. Motor
9. Base
10. Speed control
11. Handle
12. Small thumb screw (for easy adjusting)
13. Small screw
14. Base fixture
15. Big thumb screw
16. Long screw
1. Loosen the screws (12.), (13.), (15.) and (16.).
2. Place the motor (8) on the upper part of the
base fixture (14.).
3. Fasten the screws (12.), (13.), (15.) and (16.).
4. Use the thumb screw (12.) to adjust the fan
angle.
Attention! Motor must be fully fastened
to the base fixture before starting the
fan guard assembly.
5. Loosen the 4 fan guard screws (4.).
Publicidad
