Polygroup SUMMER WAVES RX1000 Manual Del Usuario página 15

PUMP REMOVAL INSTRUCTIONS FOR TROUBLESHOOTING
1. Unplug the Power Filter Pump. Remove the RF Diverter
the SF Cap 5 onto the Suction Fitting
2. To depressurize the Filter Pump system, vent the filter pump by twisting the Vent Screw
3. Loosen the Hose Clamps 10 at the filter pump inlet and outlet. Detach both Hoses
4. Turn the filter pump up-side-down. The Base
15 from the Canister 17 by turning counter-clockwise.
17
5. Remove the Base 15 from the Canister
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
7 from the Return Fitting
2 .
15 is now locked by a latch pin. To release the lock, push the latch pin down and then turn left. Detach the Base
15
19
19 .
15
19
17
MST. Extended operating days and hours during peak season requirements.
OWNER'S MANUAL
6 , and then plug the Return Fitting
12 counter-clockwise.
9 from the filter pump.
6. Remove the Motor Assembly
to lose the Rubber Nozzle
6 with the RF Plug 8 . Hand tighten
15
19
17
19 from the Canister 16 . Be careful not
18 .
19
18
15