1. READ ALL INSTRUCTIONS CAREFULLY and get a thorough understanding of what is required to assemble your RX series Filter Pump.
2. Before you begin to assemble the pool, identify, count, and check all parts needed for assembly.
3. It is recommended that you have some PETROLEUM JELLY on hand for lubricating the gaskets.
FILTER PUMP IMPORTANT NOTES
1. Installer shall follow written instructions provided for operation of the filter pump systems.
2.
All electrical components shall be installed in accordance with Article 680 of the National Electrical Code (NEC) "Swimming Pools, Fountains and Similar Installations"
or its latest approved edition.
3.
The T
ype D Filter Cartridge
20
diameter chlorine tablets. Check your chlorine levels to determine the proper number of chlorine tablets to add. The filter cartridge will automatically dispense chlorine
into the pool as the Filter Pump runs. Y
DO NOT use this to dispense powdered chlorine, shock treatment, or any other type of chemicals as damage to the pump, filter cartridge, and pool will occur.
4. The RX Series Filter Pump systems are manufactured by Polygroup
Volts A.C. - 60 Hz. (ALL Units must have a minimum of 105 V.A.C. to start and run properly.)
FILTER PUMP POWER INFORMATION
FILTER PUMP MODEL
RX-600
RX-1000
RX-1500
ITEMS
PARTS NAME
Fitting Gasket
1
Suction Fitting
2
Suction Fitting Thrust Washer (SF Washer)
3
Fitting Lock Nut
4
Suction Fitting Cap (SF/Service Cap)
5
Return Fitting
6
Return Fitting Diverter (RF Diverter)
7
Return Fitting Plug (RF/Service Plug)
8
9
Hose Camp
Filter Pump Assembly (Image Reference Only)
A) RX600
B) RX1000
C) RX1500
Vent Screw
Vent Screw O-Ring
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
PRELIMINARY STEPS
will hold as many as 2 of the 1" diameter chlorine tablets and the Type A/C Filter Cartridge
ou must have the type of Filter Cartridge
PARTS LIST
QTY.
2
1
1
2
1
1
1
1
Hose
2
4
1
1
1
MST. Extended operating days and hours during peak season requirements.
with a central core mesh divider (See page 9) to use the chlorine dispenser.
20
and ETL control number 4000608 and 4006317 - double insulated and grounded - 120
®
WATTAGE
65 watts
105 watts
175 watts
ITEMS
Type D Filter Cartridge (RX600 only)
Type A/C Filter Cartridge (RX1000 & RX1500)
Pump Body (Image Reference Only)
Volute Cover Lock Nut (RX600 & RX1000)
Volute Cover Bolt and Nut Set (RX1500 only)
GFCI Power Cord Set (Image Reference Only)
OWNER'S MANUAL
will hold as many
20
AMPERAGE
1.7amps
1.4amps
3.1amps
PARTS NAME
Seal Top
Pump Base
Canister Gasket (Motor Seal)
Filter Pump Canister
Rubber Nozzle / Gasket
Pump Motor Assembly
Rotor Assembly
Volute Cover
O-Ring for Hose Connections
as 6 of the 1"
QTY.
1
1
2
1
1
1
1
1
1
1
1
1
1 set
1
4
7