Descargar Imprimir esta página

ULTIMATE SPEED UPK 10 G4 Instrucciones De Funcionamiento Y De Seguridad página 14

Batería externa con compresor

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 140
z Check the charge level of the power bank with compressor
Switch on the power bank with compressor
When charging, the bars on the battery level indicator
The number of permanently lit bars on the battery level indicator
power bank with compressor
If the device is fully charged, all four bars will be permanently lit on the battery level indicator
Bars for the battery level indicator
1 flashes
1 permanently lit
2 permanently lit
3 permanently lit
4 permanently lit
z Charging the power bank with compressor
Connect the USB cable
socket or an appropriate USB network adapter (working output voltage U
PLEASE NOTE: USB AC adapter not included in the scope of delivery.
PLEASE NOTE: An undervoltage protection circuit is installed in the power bank with compressor
to protect the device from damage. This prevents a deep discharge of the power bank with
1
compressor
and automatically switches the device off once the rechargeable battery pack is
1
fully discharged. In this case, only one of the four bars on the battery level indicator
No more energy can be obtained and the compressor function will be deactivated.
Please recharge the power bank with compressor
z Charging mobile phones and tablets
Press the power switch for the power bank with compressor
Connect a suitable USB charging cable to the USB port (5 V
(5 V
/1 A)
12
The charging process starts automatically.
PLEASE NOTE: You cannot charge USB devices (e.g. mobile phone, tablet) while the power
bank with compressor itself
z Using the integrated compressor
Screw the compressed air hose
(see Fig. C).
1
Place the device on a level and non-flammable surface. Do not operate the device in a dusty
environment. This is a fire risk and the device could be damaged.
PLEASE NOTE: Depending on the inflatable item, you can either use the compressed air hose
directly or use it together with the valve adapters
14
GB/IE/NI/CY/MT
.
1
with the 5 V
24
and then plug it into your mobile phone or tablet.
is being charged.
1
on to the hose connection
17
by using the switch for the power bank
1
will flash.
13
Charge level
0%
25%
50%
75%
100%
/2 A charging port (USB-C)
.
1
once.
9
of the power bank with compressor
15
,
and
21
22
23
9
shows the charge level of the
13
and an appropriate USB-A
10
5 V
).
out,max
13
/2 A)
or the USB port
11
supplied in the scope of delivery.
.
.
13
will flash.
17

Publicidad

loading