Set Time And Date; Usb Connection - Bresser 88-54200 Instrucciones De Uso

4.4 Exposure value
Select EV mode and press OK but-
ton to confi rm. Exposure compensa-
tion helps you increase or decrease
the EV to adjust the results. This
feature is applied to render the sub-
ject appropriately. The adjustment
unit is 1/3, within the range –2EV
~ +2EV You can check the result
of the compensation by viewing the
image on the screen.
5. SETUP
In SETUP, You can see the icons
shown on the screen.

5.1 Set time and date

Press the left or right button to
select the date format from MM/DD/
YYY, DD/MM/YYYY or YYYY/MM/
DD. Press the OK button to confi rm.
Then it will go to date and time
setting. Press Left or Right button to
adjust the date and time. Press the
OK button to confi rm the setting and
return to main menu.
5.2 Set the picture size
Select the image quality setting
to set a picture resolution. Press
the left or right button to select
the picture size, and press OK
button to confi rm and return to main
menu. The Options would be 2M
(1600x1200 pixels), 1.3M (1280x
960 pixels), VGA (640x480 pixels).
5.3 Setting the video size
Select the video quality setting to
set the resolution. Press the left or
right button to select the video size,
and press OK button to confi rm and
return to main menu. The Options
would be VGA (640x480 pixels);
QVGA (320x240 pixels).

5.4 USB Connection

Select USB Connection and press
OK button to confi rm. PC Cam: Use
your microscope as a PC camera
(PC microscope). Disk Driver: Use
your microscope as a mass storage
for transfering fi les to your computer.
5.5 Light Frequency
Set the anti-fl icker frequency to
50Hz. (Please use 50Hz if using the
microscope in Europe, Japan and
Asia). Set the anti-fl icker frequency
to 60 Hz. (Default setting. Please
select if using the microscope in the
United States).
GB
25