Ryobi RY15518 Manual Del Operador página 6

 Check the work area before each use. Remove all objects
such as rocks, broken glass, nails, wire, or string which
can be thrown or become entangled in the edger blade.
 Be sure all guards are properly and securely attached.
 Replace dull or worn blade; do not attempt to sharpen.
 Use this edger for edging along sidewalks, driveways,
flower beds, and similar areas. Do not use for any other
purpose.
 Be thoroughly familiar with the controls. Know how to
stop the unit and disengage the controls quickly.
 Do not use the edger on or near graveled surfaces.
 Make yourself familiar with the area you are edging. Be
aware of uneven sidewalks and holes in the terrain as well
as other similar hazardous conditions (example: wire or
wire rope which can break off and become a dangerous
projectile). Always push the edger attachment slowly over
rough ground.
 Do not attempt to remove cut material nor hold material
to be cut when the engine is running or when the cutting
blade is moving.
 Keep hands and feet away from the cutting area.
 Always keep your right hand on the rear handle and your
left hand on the front handle when the blade is rotating.
 A coasting blade can cause injury while it continues to
spin after the engine is stopped or throttle trigger released.
Maintain proper control until the blade has completely
stopped rotating.
 Check blade nut for tightness before operating the
attachment.
SPECIFIC SAFETY RULES
4 — English
 Improper assembly can create a dangerous situation.
 Never stand or have any part of your body in line with the
path of the edger blade.
 If the edger strikes any type of foreign object:
a) Stop the edger and remove the spark plug wire or
disconnect from the power supply.
b) Inspect for damage to the edger attachment.
c) Correct damage before using the edger attachment.
Failure to do so can cause serious injury.
 Always stop the engine or motor and remove the spark plug
wire or disconnect from the power supply before attempting
to remove any obstruction caught or jammed in the blade,
installing attachment, or making any adjustments.
 Store Idle Appliance Indoors — When not in use, product
should be stored indoors in a dry and high or locked up
place—out of the reach of children.
 Save these instructions. Refer to them frequently and use
them to instruct others who may use this product. If you
loan someone this product, loan them these instructions
also to prevent misuse of the product and possible injury.
NOTE: SEE YOUR POWER HEAD OPERATOR'S MANUAL
FOR ADDITIONAL SPECIFIC SAFETY RULES.
SAVE THESE INSTRUCTIONS