Publicidad
Idiomas disponibles
Idiomas disponibles
English
Instructions for Hard Hat Lanyard DXDP610400
WARNING:
Do not clamp onto solid objects
suchas hard plastics or metal. The clamp is for fabric
items only. Do not force the clamp over material
that is larger than the jaw opening.
WARNING:
Make sure the lanyard is secure on
hat and clothing prior to use.
USE ONLY FOR TETHERING HARD HATS.
Take the free end of
the hard hat lanyard
and loop it through
a captive hole on the
Helmet accessory slot or
suspension.
8
MAX
Take the connector end
2
2
LBS
of the lanyard and pass it
0,91 kg
through the clamp.
Press the clamp down to
ensure the connection is
secure.
Attach clamp end of the
lanyard to a harness
For all attachments,
double check to ensure the
connection is secure and
that the lanyard does not
obstruct vision or interfere
with ability to do work.
NEVER modify hard hats to create attachment points.
Coiled Tool Lanyard DXDP710900
WARNING:
Do not attach multiple tools to the
wrist band tool holder, that combined, may exceed
the 2 lbs/0.91Kg. maximum rating.
.
Connect the carabiner
of the spring lanyard to
the D-Ring of wrist band
holder. Now the wrist band
is ready for use.
Make sure wrist strap
stays secure on your wrist.
It must not slip over your
hand.
MAX
Clip to Loop Spring Lanyard DXDP711100
2
2
LBS
0,91 kg
WARNING:
on top of the lanyard, it could
weaken the structure of the
lanyard resulting in an accident.
For adding additional tool
to your wrist band, attach
the spring lanyard to the
D-Ring of the wrist band.
NEVER modify tools to create attachment points.
English
MAX
2
2
LBS
0,91 kg
Never cut the tape
The spring lanyard is
used for additional tool
attachment. It comes with
a clip on one end and an
adjustable thread loop at
the other. Simply attach
the clip to the D-ring
provided on the mobile
holder.
The adjustable thread loop
can be cinched around
equipment mobile clip,
which helps increase the
security of the equipment.
9
Publicidad
