Attention
Make sure it contains all the indicated material. Check that it has not been damaged in
transport.
Immediately inform the distributor or supplier of any damage or missing parts, since claims
filed with later dates will not be recognized.
4.2. Mounting
4.2.1. Step 1: Assembling the wheelbase and motor
Secure the wheel to the oil tank shaft with an M24x2 slotted nut (63) and a Ø4x36 cotter
−
pin (64)
−
Attach the shaft cover (65).
Attach the log support with a bolt (68), washer (67, 66, 67) and nut (23).
−
4.2.2. Step 2: Attach the tow bar and bracket
−
Attach the tow bracket (31) to the tow bar with a cotter pin (34), M10X75 bolt (35), M10
locknut (23) and R pin (22).
−
Secure the cylinder support (24) with an M12 nut (25).
9
EN