Pontec PondoSolar LED Island Instrucciones De Uso página 14

- EN -
How to proceed:
1. Disassemble the unit.
2. Clean the filter housing and impeller unit. (→ Replacing the impeller unit)
3. Pull the nozzle unit apart.
4. Clean all parts.
– Use a soft brush as an aid.
– Rinse parts in clean water.
5. Clean the solar module with a damp cloth and wipe dry.
6. Reassemble the unit in the reverse order.
Replacing the impeller unit
How to proceed:
 C
1. Pull the filter housing from the pump.
2. Remove the foam filter from the filter housing and rinse it out.
3. Pull the cover off the impeller unit (push-fit fastening, lever out carefully).
4. Pull out the impeller unit and clean or replace.
5. Reassemble the unit in the reverse order.
Storage/winter protection
The unit is not frost-proof and has to be removed and put into storage if minus
temperatures are expected.
How to correctly store the unit:
• Store the unit in a dry and frost-free place.
Malfunction remedy
Malfunction
Pump does not start.
Insufficient or no pump delivery The filter is clogged.
14
Possible cause
The solar module is soiled.
Impeller unit is blocked
The nozzle unit is clogged.
The impeller unit is worn.
Solar module produces insuffi-
cient power
Remedy
Clean
Clean
Open the pump, remove and
clean the filter.
Remove and clean the nozzle
unit.
Replace
Direct sunlight required
Align the solar module to the
sun.