Publicidad
Idiomas disponibles
Idiomas disponibles
3 YEARS
L I M I T E D WA R R A N T Y
8.3 Stripping paint
- Mount an appropriate accessory.
- Set a high air temperature.
- Switch the tool on.
- Direct the hot air onto the paint to be removed.
- When the paint softens, scrape the paint away using a hand scraper.
WARNING
Do not strip metal window frames, as the heat may be conducted onto the glass and crack it.
When stripping other window frames, use the glass protection nozzle.
Do not keep the tool directed at one spot too long to prevent igniting the surface.
Avoid collecting paint on the scraper accessory, as it may ignite. If necessary,carefully remove
paint debris from the scraper accessory using a knife.
8.4 Stationary use
This tool can also be used in stationary mode.
- Place the tool onto the workbench.
- Secure the cable to prevent pulling the tool o the workbench. Carefully switch the tool
on.
WARNING
Make sure that the nozzle always points away from you and any bystanders.
Make sure not to drop anything into the nozzie.
8.5 cooling down
The nozzle and accessory become very hot during use. Let them cool down before attemp-
ting to move or store the tool.
- To reduce the cooling time, switch the tool on at the lowest air temperature setting and let
run for a few minutes.
- Switch the tool o and let it cool down for at least 30 minutes.
7
Publicidad
