Publicidad
Idiomas disponibles
Idiomas disponibles
The accessories are not included in the packaging
- Make sure that the tool is switched o and the nozzle has cooled down.
- Falling down nozzle can set an object on re. Nozzles must be mounted rmly and secure
on the unit.
- Touching a hot nozzle can lead to serious burns .Before attaching or replacing a nozzle,
allow the unit to cool down completely or use a suitable tool.
- A hot nozzle can set a surface on re. Place down hot nozzles only on re-proof surfaces.
- An incorrect or defective nozzle can lead to heat accumulation and damage the unit. Use
only original nozzles according to the table that are suitable for your unit.
12) TROUBLESHOOTING
PROBLEM
- Unit will not start
POSSIBLE CAUSE
- Cord not plugged in
- Circuit fuse is
blown
- Circuit breaker is
tripped
- Cord or switch is
damaged
3 YEARS
L I M I T E D WA R R A N T Y
POSSIBLE SOLUTION
- Plug tool into a working
outlet
- Replace circuit fuse. (If the
product repeatedly causes
the circuit fuse to blow,
discontinue use immediately
and have it serviced at autho-
rized servicer.)
- Reset circuit breaker. (If the
product repeatedly causes
the circuit breaker to trip,
discontinue use immediately
and have it serviced at autho-
rized servicer.)
- Have cord or switch repla-
ced a Authorized Servicer
11
Publicidad
