Publicidad
Idiomas disponibles
Idiomas disponibles
9) MAINTENANCE AND CLEANING
Attention! Before performing any work on the equipment, pull the power plug.
9.1 Maintenance
Your Power Tool has been de signed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
9.1 Lubrication
Your power tool requires no additional lubrication.
9.3 Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft cloth.
9.4 Cleaning
- Keep the ventilation slots of the machine clean to prevent overheating of the engine.
- Regularly clean the machine housing with a soft cloth, preferably after each use.
- Keep the ventilation slots free from dust and dirt.
- If the dirt does not come o use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage
the plastic parts.
10) TECHNICAL DATA
Power
Air temperature I
Air temperature II
Air temperature III
Input Current
1.800 W
50°C - 250L/M
50°C - 450°C - 250L/M
90°C - 600°C - 500L/M
110 V - 60 HZ
3 YEARS
L I M I T E D WA R R A N T Y
8
Publicidad
