Publicidad
Idiomas disponibles
Idiomas disponibles
10.1 ASSEMBLY AND ADJUSTMENT
Prior to assembly and adjustment always UnplUg the tool.
The air temperature can be adjusted to suit a wide range of applications. The table below
suggests settings for di erent applications.
Setting
- Cooling the hot parts
I
- Cooling the machines before changing the nozzle.
- Drying paint, varnish color shade samples, ller, adhesives, construc-
tion joints and stucco forms
- Drying wet timber prior to lling
- Removing stickers
- Joining adhesives-Large-surface gluing with contact adhesives, acti-
II
vation of pressure-sensitive adhesives, acceleration of bonding proces-
ses, releasing of bonding points as well as releasing or bonding of
edge band or veneer.
Waxing and de-waxing
- Shrinking PVC wrapping and insulation tubes
- Defrosting of icy stairs and steps, door locks, trunk lids, car doors or
water pipes, as well as for defrosting refrigerators and ice boxes
- Welding of thermoplastic polymer, ooring materials of PVC and lino-
leum, PVC-coated fabric, tarpaulins and foils
- Bending plastic pipes and sheets
- Soldering plumbing joints, tin, special silver solder, SMD elements, cable
lugs
III
- Loosening rusted or tightly fastened nuts and bolts
- Removing old and even thick coatings of oil paint , lacquer, varnish and
synthetic plaster
- Disinfection-With hot air of 6000C, you can quickly rid animal sties/sta-
bles of bacteria .Woodworm infestation can be controlled (Caution:
Danger of re! Do not heat up the wooden surface excessively).
3 YEARS
Applications
L I M I T E D WA R R A N T Y
9
Publicidad
