Tecno-gaz KYRI CART Instrucciones De Uso página 137

INSTRUCTIONS FOR USE
, the changed parameter will be saved only temporarily. The change will remain saved until the instrument
program has been changed (Prog 1 – 9).
The change will be maintained ever after the dental unit has been turned on /off. To cancel the temporary setting, press
the button and select the current program.
Data will be over-written with the data from the memory for the said program. To save the change of the parameter
permanently into the respective program, press the button
To activate the scaler, take it and move the foot controller lever to the right and/or the press the pedal of the combined
foot controller. When moved to the extreme position, the scaler has the ouput displayed. To stop the activity, move the
lever (pedal) of the foot controller to the starting position. CHIPBLOWER function is recommended to use after the
activity has been finished. The scaler output can be set by means of the buttons + / - within the range of 0-100% with
the instrument taken in rest or in operation and the lever /pedal of the foot controller is in maximum position. When
working with the instrument, the output can be adjusted continuously by pedal or by the lever of the foot controller in the
analogue mode from 0 up to maximum set value.
Assign function to the left / right side button of the foot controller at instrument control
Pressing of left/right side icon of the button opens „pop-up menu" with the offer of functions. Select desired
function by pressing the appropriate button. Press „ESC" button if you want to cancel. You can setup both:
LEFT/RIGHT side buttons of the foot controller. You can choose only those functions, which are available
for the current tool. The others are disabled.
Note
After the scaler has been placed in the holder, the light goes off. Always return the scaler into the holder only
after the activity has been finished (lever / pedal of the foot controller in the basic position).
UM_EN_TYGI350B_2018-09_ver1.0
Chipblower function
Cooling of instrument ON/OFF
Changing of the direction of motor rotation
Instrument illumination ON/OFF
Main light ON/OFF
Bell
Cup filling
Bowl flushing
No function chosen
Switching the program of the instrument
Switch color of the instrument light (white/blue) (applies to motors:
DENSIM DX BLUE, DENSIM DX PRO BLUE)
.
after the change
TYGI 350 B
36 / 49