Glacial Hidro Serie Manual De Operación página 21

English
HANDLING AND TRANSPORT
This cooler contains R-134a as a refrigerant and was fully inspected befo-
re leaving the factory. Check for signs of damage as soon as you receive
your equipment. If there is damage, contact your authorized dealer imme-
diately.
If you received a device with any type of damage, refuse the shipment and
contact the carrier immediately to report the incident.
The design of this appliance is contemplated for operation in temperatures
of 27° C and 55% humidity. No structure or integration to bars, kitchenet-
tes or niches is required.
Do not place the appliance near heat sources such as stoves, radiators,
grills, etc. and do not place it in areas where the sunlight shines directly on
the appliance.
Wiring System
Proper electrical installation is required for your appliance to work properly
and prolong the life of electrical parts and the compressor.
BEFORE CONNECTING THE APPLIANCE FOR THE FIRST
TIME: check the nominal voltage on the equipment labels that are
stuck on the cabinet and on the back of the appliance.
Verify that the electrical line does not fl uctuate more than 10% of
the nominal value of operation specifi ed in your appliance.
- DO NOT use extension cords.
- DO NOT connect the appliance to multiple outlets or to out-
lets with other electric appliances connected.
- The appliance MUST be grounded.
IMPORTANT:
• Do not attempt to repair any part of the electrical system yourself. Con-
tact your dealer or authorized service center.
• The appliance must be grounded.
• Ignoring any of the precautions set forth in this manual voids the
Warranty.
• The appliance must be connected to an electrical line with a 14 gauge
cable or wire at least and protected with a 10 ampers fuse or breaker.
Página 21 de 27